18 October 2013

Cisco Discovery - DsmbISP Module 1 - V.4 .



Q.1 Which two things can be determined by using the ping command? (Choose two.) the number of routers between the source and destination device 
 the IP address of the router nearest the destination device
 the average time it takes a packet to reach the destination and for the response to return to the source 
 whether or not the destination device is reachable through the network
 the average time it takes each router in the path between source and destination to respond


Q.2 What are three main types of high-bandwidth connection options used by medium- to large-sized businesses? (Choose three.)
 DSL 

 cable modem
 Ethernet
 metro Ethernet  T1 
 T3


Q.3 What is the maximum T1 transmission speed?
 56 kbps  128 kbps  1.544 Mbps  2.4 Mbps


Q.4 Which of the following start the test of destination reachability?
 echo request issued by source  echo reply issued by source  echo request issued by destination  echo reply issued by destination


Q.5 Which statement describes a function of a Tier 1 ISP?
 peers with other similarly sized ISPs to form the global Internet backbone  uses the services of Tier 3 ISPs to connect to the global Internet backbone  pays Tier 2 ISPs for transit services to connect across continents  limits the offered services to small geographic areas


Q.6 At which point do individuals and small businesses connect directly to the ISP network to obtain Internet access?
 at a POP  at an IXP  at a Metro Ethernet link  on the ISP extranet


Q.7 What information is contained in the numbered RFCs maintained by the IETF?
 the rules for acceptable use of websites and e-mail  the descriptions of various hardware components that connect to the Internet  the specifications and rules for how devices communicate over an IP network  the standards for cabling and wiring for local Ethernet networks


Q.8 Which network support services team is responsible for testing a new customer connection and for monitoring the ongoing operation of the link?"
 customer service  help desk  network operations  on-site installation


Q.9 Which network support services team identifies whether the client site has existing network hardware and circuits installed?
 customer service  help desk  network operations  planning and provisioning


Q.10 Which ISP network support systems team will typically contact the customer once a new circuit is ready and guide the customer in setting up passwords and other account information?
 help desk  customer service  network operations center  on-site installation team  planning and provisioning


Q.11 What feature allows network devices to be scalable?
 a fixed number of interfaces  ease of repair  modularity  low maintenance requirements  low cost


Q.12 Which command generated this output?

1 12.0.0.2 4 msec 4 msec 4 msec
2 23.0.0.3 20 msec 16 msec 16 msec
3 34.0.0.4 16 msec 18 msec 16 msec 
 Router# traceroute 34.0.0.4  Router# nslookup 34.0.0.4  Router# ping 34.0.0.4  Router# telnet 34.0.0.4


Q.13 Which network utility helps determine the location of network problems and identifies routers that packets travel across?
 ping  ipconfig  traceroute  ixp


Q.14 What interconnects the Internet backbone?
 gateway routers  IXPs  POPs  satellite dishes


Q.15 What units are used to measure Internet bandwidth?
 bits per second  bytes per second  hertz  megabytes per second  packets per second


Q.16 The IT manager of a medium-sized business wishes to house the company-owned web servers in a facility that offers round-the-clock controlled access, redundant power, and high-bandwidth Internet access. Which ISP service will fulfill this need?
 web hosting  planning and provisioning  application hosting  equipment colocation  Tier 1 ISP services


Q.17 What is the purpose of an RFC?
 to provide the connection point for multiple ISPs to the Internet  to document the development and approval of an Internet standard  to connect a business to an ISP  to provide data communication services to ISP customers  to monitor network performance and connection status of ISP clients


Q.18 When did the Internet become available for use by businesses and consumers?
 1979  1984  1991  1999  2000


Q.19 What was the original purpose of the Internet?
 voice communication  marketing  research  commerce


Q.20 What three support service teams are commonly found within an ISP? (Choose three.)
 help desk  computer support  application readiness  network operations center  planning and provisioning  implementation and documentation

No comments:

Post a Comment